(PC-045-A) 45 Series Plate Connector

These plate connectors will only fit in the 45 Series extrusions and are 45mm x 45mm.  The connecting extrusion will need to be tapped M12 x 1.75

The parts are 100% Equivalent to the following manufacturers:

• 80/20 – P/N 14136
• Bosch Rexroth – P/N 3 842 520 802
• T-SLOTS – #671608
• McMaster #5537T579

The connector comes with locating tabs that will prevent the extrusion from twisting. The connector plate is screwed to the end of one extrusion with the M12 screw, then screwed down to the mating extrusion with two M6 screws.  The connector allows easy adjustment if required.