- 50%
(PC-045-A) 45 Series Plate Connector
The parts are 100% Equivalent to the following manufacturers:
- 80/20 – P/N 14136
- Bosch Rexroth – P/N 3 842 520 802
- T-SLOTS – #671608
- McMaster #5537T579
SKU: PC-045-A
Category: 45 Series / 10mm slot
$6.50 Original price was: $6.50.$3.25Current price is: $3.25.
538 in stock
(PC-045-A) 45 Series Plate Connector
These plate connectors will only fit in the 45 Series extrusions and are 45mm x 45mm. The connecting extrusion will need to be tapped M12 x 1.75 The parts are 100% Equivalent to the following manufacturers:
The connector comes with locating tabs that will prevent the extrusion from twisting. The connector plate is screwed to the end of one extrusion with the M12 screw, then screwed down to the mating extrusion with two M6 screws. The connector allows easy adjustment if required. |
Specification: (PC-045-A) 45 Series Plate Connector
Weight | .2 lbs |
---|---|
Dimensions | 1.77 × 1.77 × .578 in |
User Reviews
0.0 out of 5
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
★★★★★
0
Write a review
Be the first to review “(PC-045-A) 45 Series Plate Connector” Cancel reply
Related Products
(MC-045-A) 45 Series Hidden Miter / Angle Connector Assembly
0
(AC-045-A) 1/4-Turn Drop-In Cable Tie
0
0
(QT-045) Drop-In Quarter Turn T-Nut – Slot 10
0
(CB-045-A) 2 Hole Inside Corner Gusset with tabs (36mmX36mmX38mm)
0
(ST-045) 45 Series Standard T-nuts for 10mm slot
0
There are no reviews yet.